Electrical Equipment and Materials - Panel2
Circuit breakers & Switches
High Current Air Circuit Breakers
Masterpact NT and NW - UL_ANSI
.jpg)
Molded Case Circuit Breakers
Static transfer switch
Switchboards
Electrical Equipment and Materials - UPS
Eaton
Emerson
UPS - SE
Smart-UPS VT
Let's Get Your Project
Started!
Features
- Stored Energy Drawout Circuit Breakers
- System voltages up to 600Volts AC
- Compartmentalized and Barriered enclosures
- Designed and built to ANSI® C37.20.1 and is Listed to UL® 1558
- Masterpact NW/NT circuit breakers are designed and built to ANSI C37.13 and C37.16. Listed to UL 1066
- Short-circuit current rating up to 200 kA without fuses
- High short-time withstand ratings up to 100 kA for 30 cycles, minimum
- Family of field installable and upgrade-able Micrologic® trip units
- Smallest equipment footprint available in this product class
- Front access to control and communications wire connections
- Bolted silver-plated copper bus provided as standard (up to 6000 amperes maximum)
- Large cable compartment pull area allowing maximum room for power cables (located at rear)
- NEMA Type 1, Type 1 with gaskets or NEMA Type 3R outdoor walk-in enclosures
- Up to 8 Masterpact NT circuit breakers can be mounted in a 30-inch wide section. (Not available for 600 volts.) Optional Features
- Smart Systems Ethernet communications for energy & asset management with built-in web pages
- Automatic Throwover PLC-based control or UL1008 listed Automatic Transfer Switch
- Arc flash limiting Masterpact NW feeder breakers available in 800, 1600, and 2000 ampere ratings
- Optional Masterpact NW/NT Remote Racking Device
- High Resistance Ground Controls/Resistor
- Surge Protection Devices
- Infrared Windows/Thermal Monitoring
- Energy Reduction Maintenance Setting Switch
- Insulated Bus
- Remote Racking Device
- Smart Systems for Electrical Distribution is a simple, plug-and-play, Ethernet-connected power distribution asset management and energy monitoring solution to help you reduce downtime and improve operational efficiency.
Communicating Smart Systems Power-Zone 4 Switchgear
Smart Systems enables local or remote 24/7 real-time status and energy monitoring of Square D Masterpact™ circuit breakers as well as other power distribution and monitoring devices, such as power meters. Rely on smart data to monitor your buildings’ health, pinpoint troublesome areas, and facilitate a predictive maintenance program. To learn more see the additional links below
Flexibility to fit in more spaces
- 42” deep
- Able to mount against a wall or back to back
- No rear access or rear doors required in rooms or buildings
- Captive Splice-from-front design
- Wide range of main/tie/feeder layouts
- ANSI C37.20.1 rated and UL certified to UL1558 & cUL certified to CSA C22.2, No. 31
- 100kA short circuit and short time (60 cycle) bus ratings available
- Silver plated bus, standard (tin plated & insulated options available)
- Standard, repeatable designs that are manufactured in ISO9001 facilities
- Industry-leading Masterpact™ drawout, stored-energy air circuit breakers
- Large cable compartment pull areas with options to increase widths
- Ethernet connectivity with embedded web server
- Advanced Power Meters & Software Solutions
- PLC control for Automatic Transfer for Main-Tie-Main or Main-Generator schemes
- Save space by reducing aisle ways required vs. Rear Accessible Switchgear
- Fit switchgear into more application spaces
- Lower Capex on building or e-house construction
- Meet layout challenges without sacrificing reliability
- Retrofit into tight spaces with a flexible footprint.
- Provide compartmentalized construction & enhance maintenance with drawout constructions that is easier to install and work on from the front
- Increase visibility to energy use and equipment health with EcoStruxure Power solutions from one supplier
Quality and Reliable Construction
Advanced Technology
Benefits
Front Accessible PZ-4 Switchgear enables you to:
Custom Option: Switchboard Features
- Ratings through 5000 A, 200 kA SCCR
- Voltages to 600 Vac or 250 Vdc
- Circuit breaker and fusible switch mains and feeders
- Hot or cold sequence utility metering
- Internally-mounted Surgelogic® surge protective devices
- Powerlogic® customer metering, including custom communications capability and inter-wiring
- Transparent Ready® equipment communications
- Quick Connect Generator option available
- Ratings up to 4000 A, 100 kA SCCR
- Voltages to 600 Vac or 250 Vdc
- Indoor and Outdoor NEMA enclosure types
- Aluminum with tin plating or Copper with silver plating bussing options
- Single or Double Row I-Line Distribution configurations available
- Internally-mounted Surgelogic® surge protective devices
- Powerlogic® customer metering, with available unwired communications capabilities.
Standard Option: RapidSource Switchboard Features
SolaHD™ S1K Series Mini-Tower Off-Line UPS
S1K Mini-Tower Off-line UPS is ideal for point-of-sale and office applications, providing highly affordable protection against equipment damage and data loss due to power surges and interruptions. These uninterruptible power systems have three outlets for CPUs and other critical devices that need both battery backup and surge protection. A fourth outlet is surge-protected only for non-critical devices such as printers and fax machines.
SolaHD™ S3K Series Mini-Tower Line-Interactive UPS
S3K Mini-Tower Line-Interactive UPS is an economical choice for applications that require the performance of a sinewave output, line interactive UPS in a mini-tower for cabinet installations. State of the art line interactive technology protects against most power disturbances without transferring to the internal battery, providing continuous power correction while optimizing battery life. Three models are available to handle your specific load and backup time requirements.
SolaHD™ S4K2U-C and S4K2U-5C Industrial On-Line UPS
S4K2U-C and S4K2U-5C Industrial On-Line UPSs are single phase, online (double conversion) UPS available in 500-3000VA, 120V and 230V. Online design means zero transfer time from external to internal power, so when utility power fails, your critical load remains supported by a seamless flow of power. Housed in a slim 2U package, the rack or tower configurable S4K2UC offers a higher power factor, longer battery life, higher reliability and reduced cost of ownership.
SolaHD™ S4K4U-C 6 kVA and S4K6U-C 10 kVA Industrial On-Line UPS
S4K4U-C 6 kVA and S4K6U-C 10 kVA Industrial On-Line UPSs are the first true online industrial uninterruptible power systems that provide flexible output voltage, an integrated maintenance bypass switch and internal batteries all in a slim 4U (7.0") or 6U (10.5") enclosure. They feature double conversion topology to provide the ultimate in protection against a wide range of potential power problems.
SolaHD™ S4K5U-5C 6 kVA International On-Line UPS
S4K5U-5C 6 kVA International On-Line UPSs feature true online (double conversion) topology for the ultimate in protection against a wide range of potential power problems. Flexible output voltages are available through the configuration program to allow for international use. Self-diagnostics simplify maintenance and troubleshooting, and the UPS is user serviceable. The standard maintenance bypass switch provides an additional level of protection.
SolaHD™ S5KC Modular Series On-Line UPS
S5KC Modular Series On-Line UPSs are scalable from 5 to 20 kVA. Designed to be fully configured, tested and shipped in the configuration you need, they have the ability to be upgraded in the field to either higher VA ratings (up to 20 kVA maximum), longer back-ups time or to add N+x parallel redundancy (to provide a fault-tolerant group of power modules and controls). This fault-tolerant system uses intelligent power and battery modules.
SolaHD™ SDU AC - A Series DIN Rail UPS
The SDU AC - A Series DIN Rail UPS System combines an industry leading compact design with a wide operation temperature range, enhanced communications and unique installation options. The SDU-A Series provides economical protection from damaging impulses and power interruptions. These units include easy to wire screw terminations for critical devices needing battery back-up such as computer based control systems.
SolaHD™ SDU AC - B Series DIN Rail UPS
The SDU AC - B Series DIN Rail UPS System combines an industry leading compact design with a wide operation temperature range, enhanced communications and unique installation options. The SDU-B Series provides economical protection from damaging impulses and power interruptions. These units include easy to wire screw terminations for critical devices needing battery back-up such as computer based control systems.
SolaHD™ SDU Series DIN Rail DC UPS System
SDU Series DIN Rail DC UPS is the back-up power protection you depend on to convert DC and AC power. Other systems convert wastefully convert from AC to DC multiple times. The SDU DIN Rail DC UPS avoids these inefficiencies of traditional systems while maximizing system uptime and reliability.
SolaHD™ SLN and SPS Mini-Tower Off-line UPS
The SolaHD SLN and SPS Series provides economical protection from damaging impulses and power interruptions. These units include three outlets for critical devices needing battery back-up and surge protection. The SLN and SPS are ideal for industrial environments as well as point of sale and office applications.
SolaHD™ SSW Mini-Tower Line-Interactive UPS
The SolaHD SSW Series is an economical choice for applications requiring the performance of a sinewave output, line interactive uninterruptible power system with the mini-tower shape for cabinet installations. It has built in protection for under and over voltage conditions including low-energy lightning surges introduced on the input power source. They are provided with an input circuit protector and surge protected data line connectors. Utility power is continually protected by the SSW Series UPS and internal battery life is optimized. They are ideal for workstations, PLCs, robotics and process control, industrial automation systems, and automatic service and dispensing equipment.
N+1 Redundancy
One (N+1) or more (N+X) redundant module can be added to the system ensuring a continuous operation for the connected load. In the event of a module failure, the load remains secure meanwhile the operator swap the new module to re-establish redundancy during operation
Hot Plug-in Modules
Rectifier modules can be added or replaced quickly and easily without shutting the complete system. Therefore the ability to add or remove the modules without powering down the system leads to a low Mean Time to Repair (MTTR)
Scalable and Flexible
The Gutor MDC rectifier/battery charger can be easily scaled to accomodate for future changes in load requirements. If more power is needed or additional consumers are added to the system, new modules can be simply plugged into empty slots to meet the new needs. This allows the performance of the system to grow in line with the requirements of the user, thereby reducing the initial investment. Different types of modules can also be combined and added to a system, making the Gutor MDC rectifier/battery charger highly flexible and able to meet changing requirement.
5kVA to 160kVA
Gutor PXP is the right choice for applications where less distortion to upstream networks is important. The PFC rectifier (Power Factor Correction) will drastically reduce the THDi (harmonics at the input) to a very low level and with its robust design, it also fits the requirements for harsh environments as faced in Oil & Gas and other heavy industries.The possibility to order PXP transformerless will further reduce the already very small footprint.
Technical information
Type |
|||
| Type Gutor PxW 1000 (single phase) | Gutor PxW 3000 (three phase) | ||
| Ratings | 5-200 kVA (Higher ratings upon request) | 10-220 kVA (Higher ratings upon request) | |
| Operating temperature | - 10 to +40 °C (max. 55 °C on request) | ||
| Allowable air humidity | < 95 % (non condensing) | ||
| Noise level | 60 – 75 dBA (depending on rating) | ||
| Communication protocols | Modbus RTU, Webpage (HTTP), Modbus TCP, IEC 61850 (others on request) | ||
Input |
|||
| Rectifier | 6-pulse thyristor bridge (12-pulse on request) | ||
| Voltage | 3 x 380 / 400 / 415V (other voltages on request) | ||
| Voltage tolerance | ''+/- 10% for DC in tolerance -15/+10% for function | ||
Battery circuit |
||
| Nominal voltage | 110 / 125 / 220 / 400VDC | |
| Applicable batteries | Lead Acid, Nickel Cadmium | |
Output |
||
| Voltage | 220 / 230 / 240V (others on request) | 380 / 400 / 415V (others on request) |
| Tolerance (static) | +/- 1 % | |
| Frequency stability (free running) | < 0.01 % | |
| Efficiency | up to 91% depending on type | |
| Distortion | linear load: ≤ 3 % / non-linear load: ≤ 5 % | |
| Overload inverter | 200% / 50-100 ms, 150% / 1 min, 125% /10 min | |
| Overload bypass | 1000 % / 100 ms | |
Gutor SDC
With its broad range of possible DC voltages, the SDC is very flexible and can meet specific requirements and a wide range of autonomy times. Similar to the other products built on the xxW platform (PxW and WxW), the SDC will withstand the harshest environmental conditions. The firmware is certified according to IEC60880 for NPP (Nuclear Power Plant) applications. This product is best in its class, because it benefits from our focus on quality and attention to detail.
Gutor SDC_C
The Gutor SDC/C is an industrial grade battery charger with a 6-pulse thyristor rectifier. While designs and components are equivalent to Gutor SDC, the Gutor SDC/C comes with standardized power ranges, options and documentation for lower capital expenditure and shorter lead time
Gutor SDC_C
The Gutor WxW are built on the same platform as our flagship Gutor PxW. They work properly under the harshest conditions met in oil and gas as well as other heavy industries. To satisfy the requirements of NPP (Nuclear Power Plant) installations, the firmware is certified under IEC60880 for third party.
With the broad range of communication features and flexibility, nearly all customer requirements can be fulfilled.
This product is best in its class, because it benefits from our focus on quality and attention to detail.
Specifications
Overview |
|||
| Presentation | This parts kit contains spare parts for the APC product model shown. | ||
| Lead time | Usually Ships within 4 Weeks | ||
Physical |
|||
| Depth | 28.50 in (72.4 cm) | ||
| Height | 9.25 in (23.5 cm) | ||
| Product Weight | 115.24 lb(US) (52.27 kg) | ||
| Width | 22.99 in (58.4 cm) | ||
Conformance |
|||
| Product Certifications | CUL Listed | ||
| standards | ISO 14001 ISO 9001 UL 1778 |
||
Environmental |
|||
| Ambient Air Temperature for | 32…104 °F (0…40 °C) | ||
| Operation | |||
| operating altitude | 0...10000 ft | ||
| Relative Humidity | 0…95 % | ||
| Ambient Air Temperature for Storage | -58…104 °F (-50…40 °C) | ||
| storage altitude | 0…15000 ft (0.00…4572.00 m) | ||
| Storage Relative Humidity | 0…95 % | ||
Ordering and shipping details |
||
| GTIN | 00731304256342 | |
| Package weight(Lbs) | 173.37 lb(US) (78.64 kg) | |
Packing Units |
||
| Package 1 Height | 31.50 in (80 cm) | |
| Package 1 width | 30.51 in (77.5 cm) | |
| Package 1 Length | 35.98 in (91.4 cm) | |
| Number of Units in Package 3 | 1 | |
Offer Sustainability |
||
| EU RoHS Directive | Under investigation | |
Contractual warranty |
||
| Warranty | 1 year repair or replace | |
Specifications
Overview |
|||
| Presentation | This parts kit contains spare parts for the APC product model shown. | ||
| Lead time | Usually Ships within 4 Weeks | ||
Physical |
|||
| Color | Black | ||
| Depth | 28.50 in (72.4 cm) | ||
| Height | 9.25 in (23.5 cm) | ||
| Product Weight | Product Weight | ||
| Width | 22.99 in (58.4 cm) | ||
Conformance |
|||
| Product Certifications | CUL Listed | ||
| standards | ISO 14001 ISO 9001 UL 1778 |
||
Environmental |
|||
| Ambient Air Temperature for | 32…104 °F (0…40 °C) | ||
| Operation | |||
| operating altitude | 0...10000 ft | ||
| Relative Humidity | 0…95 % | ||
| Ambient Air Temperature for Storage | -58…104 °F (-50…40 °C) | ||
| storage altitude | 0…15000 ft (0.00…4572.00 m) | ||
| Storage Relative Humidity | 0…95 % | ||
Ordering and shipping details |
||
| GTIN | 00731304256342 | |
| Package weight(Lbs) | 173.37 lb(US) (78.64 kg) | |
Packing Units |
||
| Package 1 Height | 31.50 in (80 cm) | |
| Package 1 width | 30.51 in (77.5 cm) | |
| Package 1 Length | 35.98 in (91.4 cm) | |
| Number of Units in Package 3 | 1 | |
Offer Sustainability |
||
| EU RoHS Directive | Under investigation | |
Contractual warranty |
||
| Warranty | 1 year repair or replace | |
Specifications
Overview |
|||
| Presentation | This parts kit contains spare parts for the APC product model shown. | ||
| Lead time | Usually Ships within 4 Weeks | ||
Physical |
|||
| Color | Black | ||
| Depth | 28.50 in (72.4 cm) | ||
| Height | 9.25 in (23.5 cm) | ||
| Product Weight | Product Weight | ||
| Width | 22.99 in (58.4 cm) | ||
Conformance |
|||
| Product Certifications | CUL Listed | ||
| standards | ISO 14001 ISO 9001 UL 1778 |
||
Environmental |
|||
| Ambient Air Temperature for | 32…104 °F (0…40 °C) | ||
| Operation | |||
| operating altitude | 0...10000 ft | ||
| Relative Humidity | 0…95 % | ||
| Ambient Air Temperature for Storage | -58…104 °F (-50…40 °C) | ||
| storage altitude | 0…15000 ft (0.00…4572.00 m) | ||
| Storage Relative Humidity | 0…95 % | ||
Ordering and shipping details |
||
| GTIN | 00731304256342 | |
| Package weight(Lbs) | 173.37 lb(US) (78.64 kg) | |
Packing Units |
||
| Package 1 Height | 31.50 in (80 cm) | |
| Package 1 width | 30.51 in (77.5 cm) | |
| Package 1 Length | 35.98 in (91.4 cm) | |
| Number of Units in Package 3 | 1 | |
Offer Sustainability |
||
| EU RoHS Directive | Under investigation | |
Contractual warranty |
||
| Warranty | 1 year repair or replace | |
Specifications
Overview |
|||
| Presentation | This parts kit contains spare parts for the APC product model shown. | ||
| Lead time | Usually Ships within 4 Weeks | ||
Physical |
|||
| Color | Black | ||
| Depth | 28.50 in (72.4 cm) | ||
| Height | 9.25 in (23.5 cm) | ||
| Product Weight | Product Weight | ||
| Width | 22.99 in (58.4 cm) | ||
Conformance |
|||
| Product Certifications | CUL Listed | ||
| standards | ISO 14001 ISO 9001 UL 1778 |
||
Environmental |
|||
| Ambient Air Temperature for | 32…104 °F (0…40 °C) | ||
| Operation | |||
| operating altitude | 0...10000 ft | ||
| Relative Humidity | 0…95 % | ||
| Ambient Air Temperature for Storage | -58…104 °F (-50…40 °C) | ||
| storage altitude | 0…15000 ft (0.00…4572.00 m) | ||
| Storage Relative Humidity | 0…95 % | ||
Ordering and shipping details |
||
| GTIN | 00731304256342 | |
| Package weight(Lbs) | 173.37 lb(US) (78.64 kg) | |
Packing Units |
||
| Package 1 Height | 31.50 in (80 cm) | |
| Package 1 width | 30.51 in (77.5 cm) | |
| Package 1 Length | 35.98 in (91.4 cm) | |
| Number of Units in Package 3 | 1 | |
Offer Sustainability |
||
| EU RoHS Directive | Under investigation | |
Contractual warranty |
||
| Warranty | 1 year repair or replace | |
Specifications
Overview |
|||
| Presentation | This parts kit contains spare parts for the APC product model shown. | ||
| Lead time | Usually Ships within 4 Weeks | ||
Physical |
|||
| Depth | 28.50 in (72.4 cm) | ||
| Height | 9.25 in (23.5 cm) | ||
| Product Weight | 115.24 lb(US) (52.27 kg) | ||
| Width | 22.99 in (58.4 cm) | ||
Conformance |
|||
| Product Certifications | CUL Listed | ||
| standards | ISO 14001 ISO 9001 UL 1778 |
||
Environmental |
|||
| Ambient Air Temperature for | 32…104 °F (0…40 °C) | ||
| Operation | |||
| operating altitude | 0...10000 ft | ||
| Relative Humidity | 0…95 % | ||
| Ambient Air Temperature for Storage | -58…104 °F (-50…40 °C) | ||
| storage altitude | 0…15000 ft (0.00…4572.00 m) | ||
| Storage Relative Humidity | 0…95 % | ||
Ordering and shipping details |
||
| GTIN | 00731304256342 | |
| Package weight(Lbs) | 173.37 lb(US) (78.64 kg) | |
Packing Units |
||
| Package 1 Height | 31.50 in (80 cm) | |
| Package 1 width | 30.51 in (77.5 cm) | |
| Package 1 Length | 35.98 in (91.4 cm) | |
| Number of Units in Package 3 | 1 | |
Offer Sustainability |
||
| EU RoHS Directive | Under investigation | |
Contractual warranty |
||
| Warranty | 1 year repair or replace | |